Hexagon head screws with self-drilling point and bonded EPDM
washer for roofing, cladding and general fastening applications
to structural steel. Fine thread and TEK 5 point suitable for steel
thicknesses from 4.0 – 12.5mm. Tough three-stage zinc-ceramic
coating for superior corrosion resistance.
Installation
1. Screws should be installed using a Tek screwdriver or cordless
drill with adequate power and a drilling speed of between 1500
– 2500 rpm. (IMPORTANT - Impact screwdrivers will damage
the threads and must not be used)
2. Use a 5/16" socket to install the screw perpendicularly into the
steel maintaining steady pressure without forcing the tool.
3. Stop inserting the screw as soon as the compression disc of the
bonded washer changes from convex to flat. Overtightening the
screw is liable to damage the thread particularly in thin steel.
Product Data
Material: SAE C1022 Carbon Steel
Finish: Zinc ceramic – 500-hour salt spray resistance
Head: 5/16" hexagon washer type
Steel Drilling Thickness: 4.0 – 12.5mm
Washer: 16mm diameter – 1.0mm thick galvanised steel with
2.0mm thick EPDM gaske