Hexagon head screws with self-drilling point for general fastening
applications to structural steel. Fine thread and TEK 5 point suitable
for steel thicknesses from 4.0 – 12.5mm. Tough three-stage zinc-ceramic coating for superior corrosion resistance.
Installation
1. Screws should be installed using a Tek screwdriver or cordless
drill with adequate power and a drilling speed of between 1500
– 2500 rpm. (IMPORTANT - Impact screwdrivers will damage
the threads and must not be used)
2. Use a 5/16" socket to install the screw perpendicularly into the
steel maintaining steady pressure without forcing the tool.
3. Stop inserting the screw as soon as the flange makes contact
with the surface. Overtightening the screw is liable to damage
the thread particularly in thinner steel.
Product Data
Material: SAE C1022 Carbon Steel
Finish: Zinc ceramic – 500-hour salt spray resistance
Head: 5/16" hexagon washer type
Steel Drilling Thickness: 4.0 – 12.5mm